PEPEC swap canopies for pickup trucks.
- PEPEC camping swap canopies with pop-up roof
PEPEC swap canopies for pickup trucks
PEPEC (Made in Germany) builds flatbed trays and swap canopies for pickup trucks, primarily using powder-coated aluminum technology. A wide range of canopies has been designed and built since 2017.
20 years of experience in vehicle design and construction enables products with the highest functionality with a top finish.
Dimension trays:
DualCab 20-1800 | 1740x1800mm |
DualCab 20-1900 | 1740x1900mm |
ExtraCab 15-1800 | 2040x1800mm |
ExtraCab 15-1900 | 2040x1900mm |
Fullsize 15-2000 | 2040x2000mm |
SingleCab 10-1800 | 2500x1800mm |
ExtraCab 10-1800 (Toyota Landcruiser) | 2300x1800mm |
Weight of trays:
A DualCab tray weighs approximately 135 kg in the basic configuration and 225 kg in the fully equipped configuration, minus the standard OEM loading area of 140-180 kg. When converted to a tray with swap option, the weights remain approximately the same.
Swap Canopies:
The swap canopies can easily be unloaded using the 4 attachable legs, if necessary, easily swapped for another canopy.
Permanent Canopies:
If now swap canopy is needed, the canopy can permanently be mounted without using the tray, what results in a lower total weight.
Target Market:
- Energy Providers
- Municipal / Maintenance
- Fire Department/Chemical Department
- Gardeners/Tree Surgeons
- Construction Company
- Ranger/Forest Rangers
- Maintenance/Repair
- Touring/4WD/Camping
The Worker swap canopies can be individually equipped depending on the desired application:
Features:
- Drawers and full-length chassis drawer
- Refrigerator and drawer drop kit
- IBS power supply, connection to the vehicle charge and optional solar
- Storage boxes
- Roof load, awnings, roof tent
The Camping canopy offers optimal functionality with a pop-up roof and access to the storage compartments from inside and outside.
Despite the large amount of usable interior space, the vehicle remains compact. Thanks to its good center of gravity and light weight, the vehicle remains safe when used offroad.
TJM Switzerland and RUGGED take care of the approval of the flatbed and Canopies in Switzerland and offer the expertise for the correct 4WD equipment for the vehicle for daily work or travel.
Product presentation at the Swiss Caravan Salon Bern 2025
Pictures of the PEPEC changing cabins offer
- Worker swap canopies with drawers
- Camping swap canopies with external access via open hatches
- Camping swap canopies with pop-up roof
- Worker swap canopies with optional roof tent, e.g., TJM
- PEPEC Worker cabin with Sortimo installation
- PEPEC Worker cabin with various drawers
- PEPEC Worker cabin with drawers for plastic boxes
- PEPEC Camping Cabin with built-in furniture
- Pepec flatbed with side boards, when installing a swap body cabin (Worker or Campingbox) the side boards are removed.
- Pepec flatbed with side boards, when installing a swap body cabin (Worker or Campingbox) the side boards are removed.
- HIilux Vigo DualCab with Pepec Flatbed.
- Hilux Revo-Camping-K-Supports-Pepec: Camping box with supports for unloading from the flatbed
- HiluxVigo-Worker-K-Pepec: Pepec Worker Box with drawers and pull-outs and TJM Allora aluminum roof tent for overnight stays
- Hilux Revo-Camping-K-Supports-Pepec: Camping box with supports for unloading from the flatbed
- HiluxRevoVigo-Camping-Worker-K-Pepec: Pepec Camping and Worker Box on Hilux Vigo DualCab and Revo ExtraCab
- Picture of IBS technology installation in Pepec cabin:
Picture of IBS technology installation in Pepec cabin:
Installed are:
- IBS 210 Ah lithium battery with Bluetooth
- IBS 1600W Ultra Sine Inverter -IBS transfer switch with residual current device
- IBS-DBM20AS with link start kit
- 15 A Victron solar controller with Bluetooth
